Tylok® 1/2 Tube OD x 1/4 NPT Pipe FEMALE STRAIGHT CONNECTOR 316 Stainless Steel

Description

Untitled Document
Tylok CBC Lok®
1/2" Tube OD x 1/4" NPT Female Connector
316 Stainless Steel Instrumentation Grade
Swagelok Ref. SS-810-7-4
CONDITION REPORT:   New & clean. May have a little shelf wear.
This brand of tube fittings is designed, manufactured and quality controlled to be totally "inter-mixable" with Swagelok and other brands such as Parker, Hoke, Bi-Lok, Brennan, Dk-Lok, Ham-Let, Hy-Lok, SSP, Superlok, and Tylok. Intermixing is the random mixing of components of different manufactures. These are even inter-mixable with single ferrule fittings such as Parker CPI, Tylok CS-Lok, SSP Unilok, and Ham-Let One-Lok.
This tube fitting is excellent for use on all non-flared metal tubing such as steel, stainless steel, copper, aluminum, and non-metal tubing such as polyethylene, polypropylene, nylon, PFA, TFE and soft PVC. Selection of the proper fitting can be found by measuring the outside diameter of your tubing with suggested tolerances not to exceed ±0.003" (1/16" to 1/8") and ±0.005" (3/16" to 1"). The tube end threads are 20 per inch and not compatible with the much inferior type plumbing fittings found in your home or local hardware store.
The precision manufacturing and stringent tolerances under rigid quality control procedures from an ISO 9001 certified facility ensures the safety performance and reliability of service whenever the brands intermixed. These are made to exacting specifications of ASME (American Society of Mechanical Engineers, ASTM (American Society for Testing Materials) & ANSI (American National Standards Institute).
DO NOT INTER-MIX FRONT/BACK FERRULES.
For example, do not inter-mix a Hoke front ferrule with a Swagelok back ferrule as manufactures make different variations. Ferrules should be considered one component.
IMPORTANT NOTE:
This is a NPT(National Pipe Thread Taper) fitting and is not available for purchase as an NPTF (Dryseal American National Standard Taper Pipe Thread) variant in stainless steel however, NPT is compatible/interchangeable with NPTF. Both types go by inside diameter rather than outside diameter and will be approximately 1/4" larger than the size stated. For example, a 1/4" NPT/NPTF fitting is over 1/2" in outside diameter. Both threads are tapered and visually appear to be the same however, there are subtle differences. An NPT fitting always requires tape/sealant and according to Parker Industries, a NPTF (Dryseal) fittings also require a sealant/lubricant. PTFE tape, if not applied properly, can contribute to system contamination, especially with fluid applications. Other alternatives are available such as an anaerobic thread sealant with PTFE.
Need more? Different size? Click here for the
theDoDadman
's store. Using the outside diameter of the tube size needed, locate the correct parameter below and input this into the store's search engine. This will return both Tube & Tube x NPT stainless steel instrumentation fittings at the lowest price anywhere.
Tube   Parameter
Tube   Parameter
1/16"     SS-100
3/8"       SS-600
1/8"       SS-200
1/2"       SS-810
3/16"     SS-300
5/8"       SS-1010
1/4"       SS-400
3/4"       SS-1210
5/16"     SS-500
1.0"       SS-1610
Specifications
Attribute Value
Type/Shape
Female Connector
Connection 1
1/2" Tube OD Compression (dbl ferrule)
Connection 2
1/4" NPT Female Pipe Taper Thread
Material
316 Stainless Steel
Maximum PSI
6,700*
Temp. Range
-325° to 1200°F
Industry Stds.
Meets/exceeds ANSI/ASME B1.20.1 | AS-7105 (frm. MIL-P-7105B) | ISO 9001:2008
Material Stds.
ASTM A-276/ASME SA-479 Bar Stock | ASTM A-182/ASME SA-182 Forgings
*Based upon thickest wall of seamless 304 or 316 stainless steel tube