TIMLOC 1169 Hinged Loft Access Door Insulated Hatch Trap Part L

Description

Timloc Zero Air Leakage Hinged Loft Access Door 1169
High-quality loft access doors for access to lofts in all types of dwelling.
Please note listing is for Loft Hatch only, the Loft Ladder is NOT included.
Loft Box Contains
1 Number White insulated loft trap door.
1 Slotted Loft Opening Pole.
1 Number White loft access door frame fitted with anti-draught and vapour seal.
2 Number Door hinge pins.
10 Number 32mm No.10 wood screws.
1 Number White plastic cap to suit a 12mm diameter pole.
FREE Loft Access Pole Supplied With Hatch.
Specification
Product No: 1169 - rectangular loft access door with twist operated catch to release a downward opening hinged door.
Clear opening dimensions: 526mm x 626mm.
Joist Opening Size Required: 562 x 662mm (The size of the opening required in your ceiling).
Overall Dimensions: 770mm x 670mm.
Loft access door (Hinged).
Area of use
Loft access door to provide simple, easy access through a ceiling into the loft space.
Features & benefits.
Purpose made loft access doors save time and money compared to traditional joiner-made timber loft access doors.
Passes all Building regulation Part L & British Standards air tightness testing.
Zero air leakage at 50Pa.
Excellent aesthetic appearance.
Insulated loft door panel with polystyrene.
Incorporates integral draught/vapour seal.
Maintenance free, no need to paint.
Hinged design allows use of a telescopic loft ladder.
Quality
Satisfies all NHBC Standards 2008 Edition.
Manufactured to BS EN ISO 9001 : 2008.
Complies with Building Regulations document L1A 2006 (Part L).
Meets all relevant British Standards.
Material & colour choice.
The frame is a one piece injection moulding in polypropylene.
The door panel is a one piece injection moulding in polypropylene.
Insulation is CFC free expanded polystyrene foam.
Available in white only.
Installation advice
This product is designed to fit between 38mm thick trussed rafters or ceiling joists spaced at 600mm centres which provide a clear joist opening width of 562mm.
If the roof design does not provide this joist opening width, a suitable opening must be formed.
Trimmers must be installed across the ends of the frame. These must be spaced to give a clear opening length of 662mm.
The frame fixes with ten screws. Three through each side and two through each end.
Fit the loft access door after the ceiling has been plaster-boarded and skimmed.
The frame must be a good fit into the trimmed opening. Never try to force it into an opening that is too small. If the opening is too large use packers to ensure a good fit.
Product No: 1169 - rectangular loft access door with twist operated catch to release a downward opening hinged door. Joist Opening Size Required: 562 x 662mm (The size of the opening required in your ceiling). Purpose made loft access doors save time and money compared to traditional joiner-made timber loft access doors. This product is designed to fit between 38mm thick trussed rafters or ceiling joists spaced at 600mm centres which provide a clear joist opening width of 562mm. If the roof design does not provide this joist opening width, a suitable opening must be formed. Trimmers must be installed across the ends of the frame. These must be spaced to give a clear opening length of 662mm. The frame must be a good fit into the trimmed opening. Never try to force it into an opening that is