Spinalator Intersegmental (IST) Replacement Rollers - Set of 3

Description

Spinalator Roller -
Replacement
Spinalator Rollers
These Replacement Rollers are for Spinalator Table with Electric Roller Height Elevation
New Rollers are Black, Higher Density Foam!
The Spinalator Roller Kit  Includes
High Density Rollers - Qty 3
Inserts - Qty 3
Bolts - Qty 3
Spinalator Rollers comes with Set of three High Density Rollers, inserts, & bolts. These replacement Spinalator rollers will fit all Spinalators with electric elevation.
Replacement Spinalator Table Rollers Instructions with Electric Elevation
Remove top from spinalator by unclamping end brackets.
Make sure hands are clear of any moving parts and turn table timer on. Elevate Roller to top height
Turn Roller rotation switch OFF, with one roller centered to the top of the triangle assembly.
UNPLUG TABLE - Some spinalators have a auto retract to lower rollers. Failure to UNPLUG table will let the roller retract automatically. This could cause bodily injury or tear up your new spinalator rollers! This will also keep you from getting shocked if you happen to touch a exposed wire.
1st Roller-Remove Bolt from Roller and remove old spinalator Roller.
Install new Spinalator roller, New style roller will have a easy one piece inserts and Single bolt with nut.
Ensure Hands, tools, and anything else is clear of rollers then plug up table. Turn spinalator rotation switch on and cycle roller to next top height and shut off rotation switch again.
UNPLUG TABLE - Some spinalators have a auto retract to lower rollers. Failure to UNPLUG table will let the roller retract automatically. This could cause bodily injury or tear up your new spinalator rollers! This will also keep you from getting shocked if you happen to touch a exposed wire.
2nd Roller-Remove Bolt from Roller and remove old spinalator Roller. Install new Spinalator roller, New style roller will have a easy one piece inserts and Single bolt with nut.
Ensure Hands, tools, and anything else is clear of rollers then plug up table. Turn spinalator rotation switch on and cycle roller to next top height and shut off rotation switch again.
Final Roller - Remove Bolt from Roller and remove old spinalator Roller.
Install new Spinalator roller, New style roller will have a easy one piece inserts and Single bolt with nut.
Ensure Hands, tools, and anything else is clear of rollers then plug up table. Turn spinalator rotation switch on and cycle rollers for final test.
Install Top, make sure Top opening is facing the right direction on table. Fasten both End latch's.
Check Chain Tension on Spinalator Roller rotation motor chain while top is removed. The Spinalator Roller tension should be like a bicycle chain; tight but not over tightened, to stretch the chain! Lube Chain with a Teflon lube. WD 40 will stop a squeak but is water based and will evaporate quickly! If you have movement in the roller after tightening chain, check spinalator sprocket for a broken weld....