PPG Proluxe/Sikkens Cetol Log & Siding Stain-GALLON

Description

PPG Proluxe Log & Siding Wood Finish
(formerly Sikkens Proluxe Cetol Log and Siding)is a
wood stain
and
sealant
that
provides
prestige, performance
and
perfection
in
every bucket. PPG Proluxe Log & Siding provides rich, saturated, vibrant colors
that make
your home stand out with a satin finish. Translucent pigments enhance
the
beauty
of
your wood. Superior durability
means
less time maintaining
and
more time enjoying your beautiful home.
Product Type:
Oil-based, alkyd resin formula
Uses:
Logs, wood siding and trim
General Description:
PPG Proluxe Log & Siding
provides you with
prestige
,
performance
and
perfection
in every bucket.
Rich
,
saturated
,
vibrant colors
make
your home
stand out
.
Translucent pigments
enhance
the
beauty
of
your wood
and
allows
the
natural wood grain
to
show through
. Two coats of the
satin finish
gives a
warm
,
welcoming
,
reflective
quality
to
your home’s exterior
.
Superior durability
means
less work
for you
over time
.
Protect
your investment
and
dream
with the
quality
and
beauty
of
PPG Proluxe Log & Siding
.
COVERAGE
Container Size
Rough Sawn (coverage per coat)
Smooth (coverage per coat)
1 Gallon
150-225 square feet
300-400 square feet
5 Gallon
750-1125 square feet
1500-2000 square feet
PRODUCT FACTS FOR
PPG PROLUXE LOG & SIDING
Temperature
50° – 90° F (10° – 32° C)
Application Methods
Natural Bristle Brush for Oil Based Stains
Roller (must be back brushed)
Airless Sprayer (must be back brushed)
Allow surface to dry minimum 24 hrs, then apply second coat
Surface Preparation
TSP or TSP-PH, Bleach and Water
Pressure washer
Clean and Dry
Free of Mold and Mildew
Moisture Content 18% or Below
Frequency
2-3 years on South and West
3-4 years on North and East
Special Instructions
If rain is expected the next day
,
Proluxe should not be applied
. Inappropriate temperature, rain and higher humidity will affect the drying process. Proluxe may become white and hazy.
Back-brushing required
Stir container every 15 minutes
Maintain a wet edge to avoid lap marks
Two Coat Application
Do Not Use on Decks and Railings
No additional mildew prevention additive is recommended
Drying Time
Allow 24 hours drying time between coats
Low temperature, high humidity or poor ventilation will increase drying time