Access Panel Drywall Repair Hide Hole Decorative Cover Sheetrock by RoutCad #4

Description

Wall Panel by RoutCad®
Description
Size #4
Hole Longest Width or Height : 7" to 8.9"
Panel Dimension : 9 1/8"X9 1/8"
Embellish your house, apartment, or office by quickly and effectively hiding ugly holes in wall and ceiling. Easy to install and remove access panel made of high quality PVC. Design for indoor or outdoor use. No need to cut the drywall to a specific size. No tools or fasteners required for the installation or removal. Fit a wide range of hole size and drywall wall thickness.
Installation
Measure the longest hole dimension (if the width is the longest dimension use the width, if the height is the longest dimension use the height). Using this measurement select the panel size. Insert the panel bracket along the hole diagonal; once the bracket is inside the hole, rotate the panel 45 degrees to completely cover the hole. Fits 3/8" to 5/8" thick drywall. Will work for the following drywall or wall thickness : 3/8" , 1/2", 5/8".
Shipping
Economy shipping is Canada Post regular mail service. Canada Post does not provide a tracking number for Economy shipping. Upon request, the seller will provide a picture of the shipped package as a replacement for the tracking number.
Standard shipping is Canada Post small package service. Standard shipping includes a tracking number.
For a faster delivery service and a tracking number, please select standard shipping. It is highly recommended to select Standard shipping.
Features
Easy to Install
Easy to Remove
Install Directly over Hole
No Hardware Required
Fire Retardant
Can be Painted
Many Sizes Available
Round and Square Shape
Preview Video
Installation Video
Painting Video
Hole measurement and drywall thickness
use a measuring tape
or use a ruler
also measure the thickness
use the longest dimension
Using a measuring tape or ruler, measure the hole longest dimension. If the width is longer, use the width. If the height is longer, use the height. If the hole is round in shape, use the diameter of the hole. If the hole is not uniform, measure the longest length of the hole. Use the hole longest dimension to make the selection of the panel. If the measurement is in between two sizes, select the next bigger size. Example number 1 : If the hole longest dimension is a little more than 6 7/8" (select size #4). Example number 2 : If the hole dimension is exactly 6 7/8" or a little less (select size #3). Also measure the drywall thickness. Most drywall are 1/2" thick. The drywall thickness can be from 3/8 to 5/8 inch.
Installation and removal (size #1 to #4)
insert bracket in hole diagonal
rotate the panel to cover hole
continue rotating to hide hole
adjust so it is horizontal
For panel of size #1 to #4, install as follow: 1) Insert the panel in the hole along the diagonal of the hole. 2) Rotate the panel 45 degrees to start covering the hole. 3) Adjust the panel so that the hole is completely covered and the panel is horizontal. To remove the panel from the hole do the installation in reverse order. Start with step 3) and finish with step 1).
Document : Dimensions