9.6CFM Single Stage Rotary Vane Vacuum Pump

Description

Short Description
1. Voltage/Frequency: 110V/60Hz
2. Flow Rate: 9.6CFM
3. Ultimate Vacuum: 75 Mircon
4. Power: 1/2HP
5. Inlet Port: 1/2" 1/4" SAE
6. Oil Capacity: 24 Oz
Description
TWICE TW-4A 9.6CFM Single Stage Vacuum Pump
The TW-4A rotary vane vacuum pump is a 110V/60Hz,9.6CFM, Single stage unit with 1/2HP motor.
The pump has the same high quality, high value features engineered into all of the vacuum pumps providing performance excellence and years of reliable service.
Application fields:
It is especially suitable for refrigeration maintenance (refrigerant such as R12 / R22 / R134a, etc.), new refrigerant vacuum pump is suitable for R410A, R407C, printing machinery, medical equipment, vacuum packaging, gas analysis, thermoforming and other industries, and it can also be used as the prefix pump of various high vacuum equipment.
Instructions
A.Maintenance
1.Keep the pump clean and prevent foreign matter from entering it.
2.Keep the oil level. Do not keep it running without oil.
3.Keep the oil clean. If it becomes dirty, muddy or has water or other volatile substances which affect limit vacuum the oil should be replaced. Before replacing the oil, start the pump and have it run about 30 minutes to make the oil thin and then stop it and let out the oil from the oil-outing mouth. Then have it run for 1-2 minutes with the gas-entering mouth open. During this time, add a small quantity of clean oil from the gas.Entering mouth so as to replace the remaining oil in the pump. Do it repeatedly. After making sure the pump is clean put on the oil-outing screw plug and then fill clean pump oil to the oil-level line from the oiling mouth.
4.If it is not in use for long, cover the oiling cap and exhaust cap and put it in a dry place. Meanwhile, damp proof and anti-rust should be considered.
5.If it needs removing and fixing is sure to have an experienced or professional technician one does it.
B.Precautions
1.Do not pump inflammable, explosive and poisonous gases.
2.Do not pump gases which can corrode metals and can exert chemical changes with the pump oil.
3.Do not pump gases containing pellet dust and gases with plenty of steam.
4.The temperature of the pumped gas should not be over 80° and the environment temperature should be 5 - 6.
5.Do not use it as a compression or a convey pump.
6.Do not use or operate without oil.
7.Do not pull on the wire when unplugging from the outlet.
8.Do not put heavy weights on the wire to avoid being extruded.
Note:
1.Accept customization, please contact customer service for details
2. If you have any questions, please feel free to contact us. We will make our every effort to give
Technical Details
Model
TW-4A
Voltage
110V/60Hz
Fl
ow Rate (CFM)
9.6
Ultimate Vacuum
75 Mircon
Power (HP)
1/2
Speed (60Hz) (rpm)
1720
Oil Capacity (Oz)
24
Inlet Port
1/2" 1/4"
Diemensions (IN)
15.35 x 5.7 x 11.02
Weight (LB)
34.1
Additional Information
Net Weight (LB)
34.1
Gross Weight (LB)
37.4
Diemensions (IN)
18.5 x 8.46 x 14.76