2CFM Single-stage Rotary Vane Economy Vacuum Pump 1/4HP 110V/60Hz

Description

Short Description
1. Voltage/Frequency: 110V/60Hz
2. Flow Rate: 2 CFM
3. Ultimate Vacuum: 3 Pa
4. Power: 1/4HP
5. Inlet Port: 1/4" SAE
6. Oil Capacity: 280 ml
Description
Our goods is mainly applied in many fields, such as refrigeration maintain, printing machine, medical equipment, vacuum packing, gas analyze and thermoplastic molding etc…
Range of application:
1.Before using your vacuum pump
(1) Check to be sure the voltage and frequency at the outlet match the specifications on the pump motor decal.Check the ON-OFF switch to be sure it is in the OFF position before you piug the pump into an outlet. Remove and discard the exhaust cap from the end of the pumps handle.
(2) The pump is shipped without oil in the reservoir. Before starting the pump,fill it with oil.Remove the Exhaust FITTING cap and add oil just shows in the bottom of the sight glass.The approximate oil capacity of the pump is 280ml.
Note: When the pump is running, the oil level should be even with the line on the sight glass. Under filling will result in poor vacuum performance. Over filling can result in oil blowing from the exhaust.
2.To shut down your pump after use
To help prolong pump life and promote easy starting.Follow these procedures for shutdown.
(1) Close the manifold valve between the pump and the system.
(2) Remove the hose from the pump inlet.
(3) Cap the inlet poet to prevent any contamination or loose particles from entering the port.
Features
1. High performance
2. Lighter ang smaller
3. Low noise
4. Backflow preventer
Technical Details
Pump Design
Single Stage
Voltage
110V 60Hz
Flow Rate
2 CFM
Ultimate Vacuum
225 micron
3 Pa
Motor Power
1/4HP
Inlet Port
1/4"SAE
Oil Capacity
280 ml
Working temperature
5 to 40 ℃
Dimensions(L x W x H)
10.63 x 4.72 x 8.86 in
Weight
11.5 Lb
Additional Information
XZ-1C VACUUM PUMP
1 PC
Operating Manual
1 PC