20" x 20" System F1 Access Panel with ½" Drywall Inlay & Touch Latches

Description

Description
The access panel consists of a welded aluminum frame and is available with ½" (12.7 mm) inlayed drywall and two latches.
Both an outer and an inner frame assembly consists of high grade aluminum which is bonded with a special welding process.
The access panels are equipped with a safety-system to prevent accidental opening. This safety system must be re-secured after each opening.
The reveal of 1/16 of an inch (1.59 mm) is visible between the outer frame and door hatch. The concealed snap locks open the access panel when pressure is applied to the spring loaded latch side.
Access Panel Design:
Non-Removable, Ready-To-Paint Door Leaf
Fire Protection:
Non-Rated
Usage:
Plasterboard Ceilings & Walls
System:
System F1
Dimensions:
Door Dimensions: 20" X 20"
Rough opening is door size + 3/8"
Handling Time:
1 - 2 Days