1.1 mm 15 Ohm/Sq FTO Coated Glass Substrates

Description

1.1 mm 15 Ohm/Sq FTO Coated Glass Substrates
FTO glass substrate, Fluorine Doped Tin Oxide (FTO) coated soda lime glass Glass: NSG Soda Lime Glass Glass Transition Temperature: 564°C (1,047°F ) Typical Dimensions: 1" x 1" (25 mm x 25 mm), 2" x 2", 4" x 4", can be customized to any size specified by the customer. Glass Thickness: 1.1 mm or 2.2 mm, other sizes are available upon request Nominal FTO Film Thickness: 320 ~ 340 nm Special Patterns: can be customized according to customer provided drawings. Sheet resistance: ~15 Ohm/sq, other values can be customized. Etching Capability: Laser etching or wet etching for detailed patterns. Maximum operating temperature: Although the FTO film can be heated up to 700°C, the soda lime glass (SLG) substrate has a glass transition temperature of 564°C. The recommended maximum operating temperature for FTO coated SLG substrates is up to 550°C. FTO coated conductive glass substrates Grade (ohm/sq) Size: L x W (mmxmm) Thickness (mm) Minimum of Order Prices of non-etched ($/sheet) Prices of etched pattern ($/sheet) ~15 10x10 1.1 100 Sheets 1.99 Contact Us ~15 25x25 1.1 100 sheets 2.99 Contact Us ~15 50x50 1.1 50 sheets 6.50 Contact Us ~15 100x100 1.1 25 sheets 14.60 Contact Us Applications for ~15 ohm/sq FTO Coated Glass Substrates High quality sputtered fluorine-doped tin oxide (FTO) films can be used as electrodes for thin film photovoltaic /solar cells (dye-sensitized cells, organic solar cells), LED display, electrochemical deposition, capacitors, Infrared detection, energy-saving windows, RFI/EMI shielding and other electro-optical and insulating applications. Fluorine doped tin oxide is relatively stable under atmospheric conditions, chemically inert, mechanically hard and abrasion tolerant, high-temperature resistant and has lower cost than indium tin oxide (ITO). FTO is well recognized as an attractive material because it is relatively stable under atmospheric conditions, chemically inert, mechanically hard, high-temperature resistant, and has a high tolerance to physical abrasion. Customer Testimonials "I very much appreciate the great customer service and rapid processing time for customized FTO glass slides. The substrates are very uniform and the thickness is perfect for electrochemical depositions and SEM imaging! I highly recommend all electrochemists to buy their substrates from MSE Supplies." -Dr. Agnes Thorarinsdottir, Postdoctoral Fellow, Harvard University Carlos Biaou, a PhD student at UC Berkeley worked with MSE Supplies to fabricate several hundred customized ITO and FTO substrates for his thesis research, and he had a very positive feedback on the products and services he received from MSE Supplies. "The uniformity of the ITO and FTO layers were excellent, and the custom pattern I ordered was well formed." "The variation in size from substrate to substrate is within the margins of errors I needed, so that's great too." "I appreciate the great customer service and diligence you've shown in customizing my substrates." Dr. Selma Duhovi from MIT has used the ITO and FTO substrates provided by MSE Supplies for smart glass application, and has been very satisfied with the products and services provided by MSE Supplies. "The FTO and ITO glass slides you sent me work GREAT!" "The substrates work really well for smart glass application." "The experiments have gone well!" Typical Academia Customers NREL, PNNL, UC Berkeley, UCLA, Caltech, MIT, Yale, University of Michigan, Cornell, University of Chicago, State University of New York (SUNY), McMaster Univ., National Physical Laboratory (NPL), etc. FTO Related Publications: Efficient and stable solution-processed planar perovskite solar cells via contact passivation, Science 17 Feb 2017: Vol. 355, Issue 6326, pp. 722-726, Hairen Tan, Ankit Jain, Oleksandr Voznyy, Xinzheng Lan, F. Pelayo García de Arquer, James Z. Fan, Rafael Quintero-Bermudez, Mingjian Yuan, Bo Zhang, Yicheng Zhao, Fengjia Fan, Peicheng Li, Li Na Quan, Yongbiao Zhao, Zheng-Hong Lu, Zhenyu Yang, Sjoerd Hoogland, Edward H. Sargent Fabrication of thin film dye sensitized solar cells with solar to electric power conversion efficiency over 10%, Thin Solid Films, Volume 516, Issue 14, 30 May 2008, Pages 46134619, Seigo Ito, Takurou N. Murakami, Pascal Comte, Paul Liska, Carole Grätzel, Mohammad K. Nazeeruddin, Michael Grätzel Compositional engineering of perovskite materials for high-performance solar cells, Nature 517, 476480 (22 January 2015) doi:10.1038/nature14133, Nam Joong Jeon, Jun Hong Noh, Woon Seok Yang, Young Chan Kim, Seungchan Ryu, Jangwon Seo & Sang Il Seok Hydrothermal fabrication of hierarchically anatase TiO2 nanowire arrays on FTO glass for dye-sensitized solar cells, Scientific Reports 3, Article number: 1352 (2013)doi:10.1038/srep01352, Wu-Qiang Wu, Bing-Xin Lei, Hua-Shang Rao, Yang-Fan Xu, Yu-Fen Wang, Cheng-Yong Su & Dai-Bin Kuang Ultra-thin high efficiency semitransparent perovskite solar cells, Nano EnergyVolume 13, April 2015, Pages 249-57, Enrico Della Gasperaa, Yong Peng, Qicheng Hou, Leone Spicciac, Udo Bacha, Jacek J. Jasieniaka, Yi-Bing Cheng
1.1 mm 15 Ohm/Sq FTO Coated Glass Substrates
FTO glass substrate, Fluorine Doped Tin Oxide (FTO) coated soda lime glass
Glass: NSG Soda Lime Glass
Glass Transition Temperature: 564°C (1,047°F )
Typical Dimensions: 1" x 1" (25 mm x 25 mm), 2" x 2", 4" x 4", can be customized to any size specified by the customer.
Glass Thickness: 1.1 mm or 2.2 mm, other sizes are available upon request
Nominal FTO Film Thickness: 320 ~ 340 nm
Special Patterns: can be customized according to customer provided drawings.
Sheet resistance: ~15 Ohm/sq, other values can be customized.
Etching Capability: Laser etching or wet etching for detailed patterns.
Maximum operating temperature: Although the FTO film can be heated up to 700°C, the soda lime glass (SLG) substrate has a glass transition temperature of 564°C. The recommended maximum operating temperature for FTO coated SLG substrates is up to 550°C.
FTO coated conductive glass substrates
Grade (ohm/sq)
Size: L x W (mmxmm)
Thickness (mm)
Minimum of Order
Prices of non-etched ($/sheet)
Prices of etched pattern ($/sheet)
~15
10x10
1.1
100 Sheets
1.99
Contact Us
~15
25x25
1.1
100 sheets
2.99
Contact Us
~15
50x50
1.1
50 sheets
6.50
Contact Us
~15
100x100
1.1
25 sheets
14.60
Contact Us
Applications for ~15 ohm/sq FTO Coated Glass Substrates
High quality sputtered f
luorine-doped tin oxide (FTO)
films can be uséd as electrodes for thin film photovoltaic /solar cells (
dye-sensitized cells, organic solar cells
), LED display, electrochemical deposition, capacitors, Infrared detection,
energy-saving windows, RFI/EMI shielding and other electro-optical and insulating applications
.
Fluorine doped tin oxide is relatively stable under atmospheric conditions, chemically inert, mechanically hard and abrasion tolerant, high-temperature resistant and has lower cost than indium tin oxide (ITO).
FTO is well recognized as an attractive material because
it is relatively stable under atmospheric conditions, chemically inert, mechanically hard,
high-temperature resistant, and has a high tolerance to physical abrasion.
Customer Testimonials
"
I very much appreciate the great customer service and rapid processing time for customized FTO glass slides. The substrates are very uniform and the thickness is perfect for electrochemical depositions and SEM imaging! I highly recommend all electrochemists to buy their substrates from MSE Supplies.
"
-Dr. Agnes Thorarinsdottir, Postdoctoral Fellow, Harvard University
Carlos Biaou, a PhD student at
UC Berkeley
worked with
MSE Supplies
to fabricate several hundred customized
ITO and FTO substrates
for his thesis research, and he had a very positive feedback on the products and services he received from
MSE Supplies
.
"The uniformity of the ITO and FTO layers were excellent, and the custom pattern I ordered was well formed."
"The variation in size from substrate to substrate is within the margins of errors I needed, so that's great too."
"I appreciate the great customer service and diligence you've shown in customizing my substrates."
Dr. Selma Duhovi from
MIT
has uséd the
ITO and FTO substrates
provided by
MSE Supplies
for smart glass application, and has been very satisfied with the products and services provided by
MSE Supplies
.
"The FTO and ITO glass slides you sent me work GREAT!"
"The substrates work really well for smart glass application."
"The experiments have gone well!"
Typical Academia Customers
NREL, PNNL, UC Berkeley, UCLA, Caltech, MIT, Yale, University of Michigan, Cornell, University of Chicago, State University of New York (SUNY), McMaster Univ., National Physical Laboratory (NPL), etc.
FTO Related Publications
:
Efficient and stable solution-processed planar perovskite solar cells via contact passivation
,
Science
17 Feb 2017: Vol. 355, Issue 6326, pp. 722-726, Hairen Tan, Ankit Jain, Oleksandr Voznyy, Xinzheng Lan, F. Pelayo García de Arquer, James Z. Fan, Rafael Quintero-Bermudez, Mingjian Yuan, Bo Zhang, Yicheng Zhao, Fengjia Fan, Peicheng Li, Li Na Quan, Yongbiao Zhao, Zheng-Hong Lu, Zhenyu Yang, Sjoerd Hoogland, Edward H. Sargent
Fabrication of thin film dye sensitized solar cells with solar to electric power conversion efficiency over 10%
,
Thin Solid Films
, Volume 516, Issue 14, 30 May 2008, Pages 46134619, Seigo Ito, Takurou N. Murakami, Pascal Comte, Paul Liska, Carole Grätzel, Mohammad K. Nazeeruddin, Michael Grätzel
Compositional engineering of perovskite materials for high-performance solar cells
,
Nature
517, 476480 (22 January 2015) doi:10.1038/nature14133, Nam Joong Jeon, Jun Hong Noh, Woon Seok Yang, Young Chan Kim, Seungchan Ryu, Jangwon Seo & Sang Il Seok
Hydrothermal fabrication of hierarchically anatase TiO2 nanowire arrays on FTO glass for dye-sensitized solar cells
,
Scientific Reports
3, Article number: 1352 (2013)
doi:10.1038/srep01352, Wu-Qiang Wu, Bing-Xin Lei, Hua-Shang Rao, Yang-Fan Xu, Yu-Fen Wang, Cheng-Yong Su & Dai-Bin Kuang
Ultra-thin high efficiency semitransparent perovskite solar cells
,
Nano Energy
Volume 13, April 2015, Pages 249-57, Enrico Della Gasperaa, Yong Peng, Qicheng Hou, Leone Spicciac, Udo Bacha, Jacek J. Jasieniaka, Yi-Bing Cheng
×
×
×
×
Tell a friend
Visit store
Watch now
Postage info
Click the Postage tab above the listing description for more info
Price:
.97
(local shipping)
See more...
FedEx Ground or FedEx Home Delivery -
.97
Standard International Shipping -
{{detail_product_description}}.00
Click the Postage tab above the listing description for more info!
Additional delivery notes
PICK UP OPTION
Sorry, our items are NOT available for pick-up.
PAYING VIA PAYPAL
We accept PayPal on our all our items so you can shop with confidence.
Simple choose the PayPal option when proceeding through the checkout.
Additional Information
No additional information at this time
Ask seller a question
You might also like
1.1 mm 12~15 Ohm/Sq ITO Coated Glass Substrate
Contact
To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.
Ask seller a question
© MSE Supplies LLC
Postage
Shipping is a flat rate across US at a rate of .97
Payment
Accepted Payment Methods
PayPal
Returns
Returns are accepted
Items must be returned within 30 days of the auction ending
Buyer will pay for return shipping.
Additional Information:
"Broken or damaged items must be reported immediately upon receiving your package (within 5 business days upon delivery). All materials and equipment are considered as received in good condition upon signature of delivery confirmation. Please inspect these items for damage prior to signing off on the condition. If it becomes necessary to return a damaged item to MSE Supplies, please contact us for a Return Merchandise Authorization (RMA) number within 30 days of receipt of the product. MSE Supplies must receive the product within 15 days of MSE Supplies issuing the Return Merchandise Authorization (RMA). The product must be in the original packaging or the return will be rejected. RMA numbers must appear on the packing list and items being returned must be packaged and shipped in accordance with all applicable regulation. All items are subject to a 25% restocking fee. \r\n\r\nItems not returnable for credit include: open or damaged containers; materials past their expiration date or with an expiration date too short for resale; custom or special orders; non-recurring engineering (NRE) cost charged to the order, and chemicals of any type. Any supplies or equipment that have been uséd and are being returned for a warranty repair may require that a decontamination form be filled out. Please contact MSE Supplies for this form."
eBay integration
by